PDF (Español (España))
FLIP
HTML (Español (España))
Revista de Arquitectura is an open access journal. More information...
Authors retain copyright and grant to the Revista de Arquitectura the right of first publication, which will be simultaneously subject to the Creative Commons (CC) BY-NC license.
Authors will sign a non-exclusive distribution license for the published version of the article by completing (RevArq FP03 Permission to Reproduce).
Self-archiving will comply with SHERPA/RoMEO guidelines and the Green classification.
To see in detail these guidelines, please consult...
Abstract
The development of a retractable cover was carried out by experimental research on organic geometry in architecture. In this case, to create a flexible and adaptable system in nature. Street theater by architect Emilio Pérez Piñero was used as a direct reference, which is also based on the principle of a folding structure, but the prototype of this proposal improves the coupling efficiency, as this research focuses on optimizing fixation members against vent generating a unified and more articulated node that helps to absorb the pressure and wind suctions on both sides of the structure, giving to it greater structural stability and balance to the system. They were developed with A36 steel and for the mantle, which is housed at the bottom of the "Velaria" deck, the use of a Serge Fluitop-Ferrari-T2-1002 membrane was proposed, with an RK (daN/5cm) 420/420 resistance, and a (t/m) 50/50 elasticity module.
Keywords:
References
McCormac, J. (2000). Diseño de estructuras de acero. Método LRFD. 2 edición. México: Alfa Omega.
Moore, F. (2000). Compresión de las Estructuras en la arquitectura. México:McGraw Hill-Interamericana.
Morales, C. C. (2009). Diseño de sistemas estructurales flexibles en el espacio arquitectónico. México: Universidad Nacional Autónoma de México.
Morales, C. C. (2012a) Diseño de sistemas flexibles en el espacio arquitectónico. Madrid: Editorial Academia Española.
Morales, C. C. (2012b). Diseño de una cubierta retráctil tensada. Actividad Posdoctoral, Universidad Politécnica de Catalunya.
Morales, C. C. (2013a). Informe técnico: sistemas estructurales retráctiles. México: Universidad Veracruzana.
Morales, C. C. (2013b). Prototipo: diseño de un cubierta retráctil tensada. México: Universidad Veracruzana.
Reglamento de Construcción del Distrito Federal (RCDF). Recuperado de: http://cgservicios.df.gob.mx/prontuario/vigente/385.htm.
Segui, W. (2000). Diseño de estructuras de acero con LRFD. México: Thomson.
Reference by
