Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.
La Revista de Arquitectura se cataloga como una publicación de acceso abierto. Más información >>>
Los autores conservarán los derechos de autor y garantizarán a la Revista de Arquitectura el derecho de primera publicación de la obra, el cual estará simultáneamente sujeto a la licencia Creative Commons (CC) BY-NC.
Los autores suscribirán una licencia no exclusiva de distribución de la versión de la obra publicada mediante la firma de (RevArq FP03 Autorización reproducción)
El Autoarchivo estará de acuerdo con los criterios expresados por SHERPA/RoMEO y la clasificación Verde.
Para ver en detalle estos lineamientos, por favor consultar >>>
Resumen
El presente artículo aborda el problema de las barreras que limitan la interacción efectiva entre la Construcción Industrializada (CI) y el Building Information Modeling (BIM), dos enfoques innovadores que prometen beneficios significativos en términos de eficiencia, sostenibilidad y calidad en la industria de la construcción. A pesar de sus ventajas, persisten obstáculos relacionados con factores económicos, culturales, tecnológicos, normativos y de gestión. Este estudio identifica y analiza dichas barreras a partir de una revisión exhaustiva de la literatura y la experiencia profesional, evaluando su impacto en la implementación global de CI y BIM. Sin embargo, se detecta la ausencia de un método estándar para medir dicho impacto y proponer estrategias de solución. El artículo propone enfoques prácticos para superar estos desafíos, como la colaboración interdisciplinaria, la creación de estándares comunes, la formación profesional y la promoción de la investigación. Se concluye reflexionando sobre el potencial transformador de CI y BIM para el sector, siempre que se aborden eficazmente las barreras identificadas.
Citas
Ahmed, S., Heman, H., & Farrell, P. (2014). Barriers to BIM/4D implementation in Qatar. 1st Int’l Conference on Smart. Sustainable and Healthy Cities (pp. 533-547). http://dx.doi.org/10.13140/RG.2.1.4990.4164
Akmam Syed Zakaria, S., Gajendran, T., Rose, T., & Brewer, G. (2018). Contextual, structural and behavioural factors influencing the adoption of industrialised building systems: a review. Architectural Engineering and Design Management, 14(1-2), 3-26. https://doi.org/10.1080/17452007.2017.1291410
Ali, M., Haslinda Abas, N., Mohd Affandi, H., & Ain Abas, N. (2018). Factors impeding the industrialized building system (IBS) implementation of building construction in Malaysia. International Journal of Engineering & Technology, 7(4), 2209. https://doi.org/10.14419/ijet.v7i4.17863
Alverinaldo, M., Setiawan, A., Nugroho, B., Teoritis, J., Bidang, T., Sipil, R., & Alverinaldo, A. (2024). Analysis of factors inhibiting the implementation of Building Information Modeling (BIM) in construction projects. Bentang: Jurnal Teoritis dan Terapan Bidang Rekayasa Sipil, 12(2), 7984.https://doi.org/10.33558/bentang.v12i2.7984
Al-Zwainy, F. M., & Amer, R. (2016). Investigation cost deviation of highway project. Research Journal of Applied Sciences, Engineering and Technology, 11, 843-855. https://doi.org/10.19026/rjaset.13.3426
Arayici, Y., Egbu, C., & Coates, P. (2012). Building Information Modelling (BIM) implementation and remote construction projects: issues, challenges, and critiques. Journal of Information Technology in Construction, 17, 75-92. http://www.itcon.org/cgi-bin/works/Show?2012_5
Azhar, S. (2011). Building Information Modeling (BIM): Trends, benefits, risks, and challenges for the AEC Industry. Leadership and Management in Engineering, 11(3), 241-252. https://doi.org/10.1061/(ASCE)LM.1943-5630.0000127
Barbosa, F., Woetzel, J., Mischke, J., Ribeirinho, M. J., Sridhar, M., Parsons, M., Bertram, N., & Brown, S. (2017). Reinventing construction: A route to higher productivity. McKinsey Global Institute. https://www.mckinsey.com/~/media/mckinsey/business%20functions/operations/our%20insights/reinventing%20construction%20through%20a%20productivity%20revolution/mgi-reinventing-construction-a-route-to-higher-productivity-full-report.pdf.
Blismas, N., & Wakefield, R. (2009). Drivers, constraints and the future of offsite manufacture in Australia. Construction Innovation, 9(1), 72-83. https://doi.org/10.1108/14714170910931552
Chan, D. W. M., Olawumi, T. O., & Ho, A. M. L. (2019). Perceived benefits of and barriers to Building Information Modelling (BIM) implementation in construction: The case of Hong Kong. Journal of Building Engineering, 25, 100764. https://doi.org/10.1016/j.jobe.2019.100764
Chen, L. K., Yuan, R. P., Ji, X. J., Lu, X. Y., Xiao, J., Tao, J. B., Kang, X., Li, X., He, Z. H., Quan, S., & Jiang, L. Z. (2021). Modular composite building in urgent emergency engineering projects: A case study of accelerated design and construction of Wuhan Thunder God Mountain/Leishenshan hospital to COVID-19 pandemic. Automation in Construction, 124. https://doi.org/10.1016/j.autcon.2021.103555
Chen, Y., Cai, X., Li, J., Zhang, W., & Liu, Z. (2022). The values and barriers of Building Information Modeling (BIM) implementation combination evaluation in smart building energy and efficiency. Energy Reports, 8, 96-111. https://doi.org/10.1016/j.egyr.2022.03.075
Dixit, S. (2021). Impact of management practices on construction productivity in Indian building construction projects: An empirical study. Organization, Technology and Management in Construction, 13(1), 2383-2390. https://doi.org/10.2478/otmcj-2021-0007
Dixit, S., Mandal, S. N., Thanikal, J. v., & Saurabh, K. (2019). Evolution of studies in construction productivity: A systematic literature review (2006-2017). Ain Shams Engineering Journal, 10(3), 555-564. https://doi.org/10.1016/j.asej.2018.10.010
Feldmann, F. G., Birkel, H., & Hartmann, E. (2022). Exploring barriers towards modular construction – A developer perspective using fuzzy DEMATEL. Journal of Cleaner Production, 367, 133023. https://doi.org/10.1016/j.jclepro.2022.133023
Hadi, N. A., Muhamad, W. M. N. W., & Othman, M. K. F. (2017). Critical factors of implementing Industrialised Building System in Sarawak: A research on SMEs. IOP Conference Series: Earth and Environmental Science, 67, 012006. https://doi.org/10.1088/1755-1315/67/1/012006
Hatem, W. A., Abd, A. M., & Abbas, N. N. (2018). Barriers of adoption Building Information Modeling (BIM) in construction projects of Iraq. Engineering Journal, 22(2), 59-81. https://doi.org/10.4186/ej.2018.22.2.59
Hatem, Z. M., Alsamarraie, M. M., Flaih, A.Y., & Oda, A. M. (2021). Barriers to the adoption of Industrialized Building System in Iraqi Construction Industry. Zanco Journal of Pure and Applied Sciences, 33(3), 30-42. https://doi.org/10.21271/ZJPAS.33.3.4
He, R., Li, M., Gan, V. J. L., & Ma, J. (2021). BIM-enabled computerized design and digital fabrication of industrialized buildings: A case study. Journal of Cleaner Production, 278. https://doi.org/10.1016/j.jclepro.2020.123505
Ibrahim, M. N. I., Hamid, A. R. A., & Mohammed, Z. (2020). Welfare facilities implementation at construction sites in Malaysia. Proceeding of Civil Engineering UTM, 5(1), 81-93. http://dx.doi.org/10.13140/RG.2.2.11747.17440
Ismail, Z. A. (2021). Implementation of BIM technology for knowledge transfer in IBS building maintenance projects. International Journal of Building Pathology and Adaptation, 39(1), 115-134. https://doi.org/10.1108/IJBPA-02-2018-0022
Jabar, I. l., Ismail, F., & Aziz, A. R. A. (2015). Public Participation: Enhancing Public Perception towards IBS Implementation. Procedia - Social and Behavioral Sciences, 168, 61-69. https://doi.org/10.1016/j.sbspro.2014.10.210
Ji, Y. B., Wang, X. S., Qi, Y., Yao, F. Y., & Wang, Y. W. (2015). Research on the technology integration of Building Industrialization Based on BIM Technology. En M. Xu & G. Wang (Eds.), Proceedings of the 2015 International conference on Applied Science and Engineering Innovation (pp.364-371). https://doi.org/10.2991/asei-15.2015.77
Lacey, A. W., Chen, W., Hao, H., & Bi, K. (2020). Effect of inter-module connection stiffness on structural response of a modular steel building subjected to wind and earthquake load. Engineering Structures, 213. https://doi.org/10.1016/j.engstruct.2020.110628
Lee, S., & Yu, J. (2016). Comparative Study of BIM Acceptance between Korea and the United States. Journal of Construction Engineering and Management, 142(3), 05015016. https://doi.org/10.1061/(asce)co.1943-7862.0001076
Leśniak, A., Górka, M., & Skrzypczak, I. (2021). Barriers to bim implementation in architecture, construction, and engineering projects—the Polish study. Energies, 14(8). https://doi.org/10.3390/en14082090
Li, X., Shen, G. Q., Wu, P., & Yue, T. (2019). Integrating Building information modeling and prefabrication housing production. Automation in Construction, 100, 46-60. https://doi.org/10.1016/j.autcon.2018.12.024
Méndez Álvarez, C. E. (2019). Elementos para la relación entre cultura organizacional y estrategia. Universidad & Empresa, 21(37), 136. https://doi.org/10.12804/revistas.urosario.edu.co/empresa/a.7681
Mishra, A., Hasan, A., & Jha, K. (2024). A holistic evaluation of BIM implementation barriers in the Indian construction industry: Pre- and post-adoption perspectives. International Journal of Construction Education and Research, 20, 358-380. https://doi.org/10.1080/15578771.2024.2320108
Mohammad, M. F., Shukor, A. S. A., Mahbub, R., & Halil, F. M. (2014). Challenges in the integration of supply chains in IBS project environment in Malaysia. Procedia - Social and Behavioral Sciences, 153, 44-54. https://doi.org/10.1016/j.sbspro.2014.10.039
Mohd Amin, M. A., Abas, N. H., Shahidan, S., Rahmat, M. H., Suhaini, N. A., Nagapan, S., & Abdul Rahim, R. (2017). A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry. IOP Conference Series: Materials Science and Engineering, 271, 012031. https://doi.org/10.1088/1757-899X/271/1/012031
Mostafa, S., Kim, K. P., Tam, V. W. Y., & Rahnamayiezekavat, P. (2020). Exploring the status, benefits, barriers and opportunities of using BIM for advancing prefabrication practice. International Journal of Construction Management, 20(2), 146-156. https://doi.org/10.1080/15623599.2018.1484555
Nawi, M. M., Lee, A., & Nor, K. M. (2011). Barriers to implementation of the industrialised building system (IBS) in Malaysia. The Built & Human Environment Review, 4(2), 34-37. https://repo.uum.edu.my/id/eprint/10230/
Nduka, D. O., Fagbenle, O. I., Ogunde, A., & Afolabi, A. (2019). Critical success factors (CSFs) influencing the implementation of industrialized building Systems (IBS) in Nigeria. IOP Conference Series: Materials Science and Engineering, 640(1), 012012. https://doi.org/10.1088/1757-899X/640/1/012012
Olanrewaju, O. I., Chileshe, N., Babarinde, S. A., & Sandanayake, M. (2020). Investigating the barriers to building information modeling (BIM) implementation within the Nigerian construction industry. Engineering, Construction and Architectural Management, 27(10), 2931-2958. https://doi.org/10.1108/ECAM-01-2020-0042
Osorio-Gómez, C. C., Amariles-López, C. C., Herrera, R. F., & Pellicer, E. (2024). BIM implementation in small and medium-sized companies in the Colombian construction sector. Construction Research Congress 2024 (pp. 570-579). https://doi.org/10.1061/9780784485286.057
Osorio-Gómez, C.-C., Moreno-Falla, M.-J., Ospina-Alvarado, A., & Ponz-Tienda, J.-L. (2020). Lean construction and BIM in the value chain of a construction company: A case study. En Construction Research Congress 2020: Project Management and Controls, Materials, and Contracts (pp. 79–86). American Society of Civil Engineers. https://doi.org/10.1061/9780784482889.039
Rahman, M. M. (2014). Barriers of implementing modern methods of construction. Journal of Management in Engineering, 30(1), 69-77. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000173
Rashid, I. A., Hamid, A. R. A., Zainudin, A. M., & Hatem, Z. M. (2019). Unethical behaviour among professional in the Malaysian construction industry. Proceeding of Civil Engineering UTM, 4(1),126-132. http://dx.doi.org/10.13140/RG.2.2.26441.26722
Ribeirinho, M. J., Mischke, J., Strube, G., Sjödin, E., Blanco, J. L., Palter, R., Biörck, J., Rockhill, D., & Andersson, T. (2020). The next normal in construction. McKinsey & Company. https://www.mckinsey.com/~/media/McKinsey/Industries/Capital%20Projects%20and%20Infrastructure/Our%20Insights/The%20next%20normal%20in%20construction/executive-summary_the-next-normal-in-construction.pdf
Roseli, F., Abas, N., Ibrahim, N., & Ta’at, N. (2024). Barriers of Building Information Modelling (BIM) implementation: Current perspectives of construction stakeholders in Johor, Malaysia. Journal of Civil Engineering, Science and Technology. https://doi.org/10.33736/jcest.5771.2024
Siebelink, S., Voordijk, H., Endedijk, M., & Adriaanse, A. (2021). Understanding barriers to BIM implementation: Their impact across organizational levels in relation to BIM maturity. Frontiers of Engineering Management, 8(2), 236-257. https://doi.org/10.1007/s42524-019-0088-2
Succar, B., Sher, W., & Williams, A. (2012). Measuring BIM performance: Five metrics. Architectural Engineering and Design Management, 8(2), 120-142. https://doi.org/10.1080/17452007.2012.659506
Tan, T., Chen, K., Xue, F., & Lu, W. (2019). Barriers to Building Information Modeling (BIM) implementation in China’s prefabricated construction: An interpretive structural modeling (ISM) approach. Journal of Cleaner Production, 219, 949–959. https://doi.org/10.1016/j.jclepro.2019.02.141
Volk, R., Stengel, J., & Schultmann, F. (2014). Building Information Modeling (BIM) for existing buildings - Literature review and future needs. Automation in Construction, 38, 109-127. https://doi.org/10.1016/j.autcon.2013.10.023
Wu, P., Jin, R., Xu, Y., Lin, F., Dong, Y., & Pan, Z. (2021). The analysis of barriers to BIM implementation for industrialized building construction: A China study. Journal of Civil Engineering and Management, 27(1), 1-13. https://doi.org/10.3846/jcem.2021.14105
Wuni, I. Y., & Shen, G. Q. (2020). Barriers to the adoption of modular integrated construction: Systematic review and meta-analysis, integrated conceptual framework, and strategies. Journal of Cleaner Production, 249, 119347. https://doi.org/10.1016/j.jclepro.2019.119347
Xu, H., Chang, R., Dong, N., Zuo, J., & Webber, R. J. (2022). Interaction mechanism of BIM application barriers in prefabricated construction and driving strategies from stakeholders’ perspectives. Ain Shams Engineering Journal, 101821. https://doi.org/10.1016/j.asej.2022.101821
Yan, H., & Damian, P. (2008). Benefits and barriers of building information modelling. 12th International Conference on Computing in Civil and Building Engineering. https://repository.
lboro.ac.uk/articles/conference_contribution/Benefits_and_barriers_of_building_information_modelling/9437141?file=17058548
Zabihi, H., Habib, F., & Mirsaeedie, L. (2013). Definitions, concepts and new directions in Industrialized Building Systems (IBS). KSCE Journal of Civil Engineering, 17(6), 1199-1205. https://doi.org/10.1007/s12205-013-0020-y
##submission.citations.for##
